how to tighten drive belt on craftsman lawn mower This is a topic that many people are looking for. g4site.com is a channel providing useful information about learning, life, digital marketing and online courses …. it will help you have an overview and solid multi-faceted knowledge . Today, g4site.com would like to introduce to you Craftsman DLT3000 Drive belt and idler pulley fix. Following along are instructions in the video below:
My dlt 3000 here was just working yesterday and then today. I got on it it and tried to move it and i went to move started right up everything fine. We released a break and no go so got her jacked up right now took the deck off im gonna show you what i found im suspecting that the somethings wrong with the drive belt and heres the drive belt.
Its on all the pulleys like its supposed to its not broken or excessively one but check it out if i reach up here and grab the brake watch this pulley right here how ellys the belt. There boy look at that and the belt just comes right off. So looks like theres a belt keeper here maybe.
Thats bent. Theres another one over here maybe thats bent no. But i do notice that up here in the backside.
This pulleys get its plastic and theres chunks missing. So do a little research and find out whats going on there get a new part so as it turns out that pulley that im trying to get access to underneath the bolts that holds it on actually has a nut lets see if i can get light in there. And show you that now ive taken the battery out and the whole battery tray and im gonna show you that down there by the steering mechanism are you down here theres a half inch nut and thats whats holding that pulley on so with a wrench on this side and a ratchet on the other side.
Im going to get pulley off there we go so now lets take a look at what were dumping that looks like the belt at one point was up here and rub it on this thing. So. Its supposed to be like so.
What those belt keepers. There music. Oh have this spacer all right.
So. Im gonna get a new pulley on order and get this bad boy put back together. So i got the new part in im gonna replace the belt right away too.
But i want to show you that i got this new polian to replace this one that is damaged and big difference. I noticed is that you could almost tell without that the diameter of the new one is larger than this one and that i think is gonna really improve things because if you look at the the belt keeper here the belt keeper previously had a pretty good sized gap. Lets do it this way okay.
So the gap that was look at that that gap between the pulley and the and the belt keeper. Now with the new new pulley. You know its a lot a lot closer there.
So i do a much better job of keeping that belt in place so im thinking. This is gonna work pretty good no no. If that was the only problem with this this one more not driving just to build slipping off the right you know here.
We are you got the new new pole. You put back in place with the larger diameter. The belt keeper is in place and even put on the new belt.
So now if you look what was going on before were not pull the brake down it would just fall off youll see its its doing what its supposed to do that bill keepers. Keeping it on so there youll put everything back together make sure. It drives and im sure that it will so thanks for watching.
Thank you for watching all the articles on the topic Craftsman DLT3000 Drive belt and idler pulley fix. All shares of g4site.com are very good. We hope you are satisfied with the article. For any questions, please leave a comment below. Hopefully you guys support our website even more.