how to spool a baitcaster with braid This is a topic that many people are looking for. g4site.com is a channel providing useful information about learning, life, digital marketing and online courses …. it will help you have an overview and solid multi-faceted knowledge . Today, g4site.com would like to introduce to you How To Spool Braid On A Baitcaster | Bass Fishing. Following along are instructions in the video below:
Folks glenn may here with bassresourcecom. And today. I wanna talk to you about spooling spooling braid on your baitcasting reel.
Theres a couple little tricks about that you need to know in order to get the most benefit from braid first of all what ive got here is a spooling station. Here from berkeley. I really like this ive had this for i dont know two or three decades now.
I dont know how long ive had it but it works really well its inexpensive great way to put your line on to the reel. You just attach your reel here put your spool here and youre ready to go if you dont have something like this you can do it the old school way the way. I used to.
Do it is just take a pencil and put it between thein the hole there on the spool. Id take the line put it through my rod and then id literally hold on to the spool with my two feet just grab the pencil on each side hold it between my feet and then i can just reel it on that way. But this spooling station makes it a lot easier.
Its not so awkward. So thats why i use it all right the first thing you need to do is put your glasses on if youre my. Age and thenso you can see what youre doing you wanna take the line you wanna put it through the eye this little eye of the baitcaster and then with a lot of these bait casters these days theyve got these little holes like a waffle ball here in the spool that makes it great.
You can stick your line in that. And then just crank your reel just a little bit. Remember if you get like a six to one gear ratio one full turn of the reel handles gonna turn that spool six.
Times so you dont needyou just need to bring it round once itll bring that line through now youre ready here.
What you wanna do is tie. An arbor knot. This is a real simple knot.
You just do a quick overhand knot. And once you have that done you clip off the tag end and that prevents any problems once you get to start spooling. The line on you wont have any issues.
There and now you just tie. One more overhand knot onto the line thats coming through your eye. Now what you gonna do is you gonna cinch it down tight by pulling it through the front of the reel.
And whatll happen is that knot will hit that first knot that you made its gonna hold it in place so it wont come undone. The last thing. I wanna do is i wanna take a little piece of tape here.
Just a little piece of scotch tape. Real thin and put it right over that knot that helps hold it in place on the reel and kinda buffers that knot a little bit so it doesnt cause any problems. When youre putting the line on now heres the trick with braid first of all clench your drag all the way down as tight as you possibly can now grab a nice terrycloth towel.
Dont use a leather glove or any like that but a nice terrycloth towel. You wanna grab a hold of that line and what i do is ill show you here i grab it like this so i kinda put a kink in the line. I wanna put as much pressure on it as possible and i hold on to it.
And i crank it on and i put a lotta pressure on while im cranking it on heres the reason for that with braid.
A lotta times. If you get a backlash. The braidll dig into itself on the spool and it makes it really really hard to get that backlash undone.
So here you wanna apply as much pressure. As you can and the key here is you dont wanna put your fingernail in between any of the line and its packed real tight. I can tell pack it really good and tight make sure you cant get your fingernail in there when you do that the line cant dig into itself and you solve that problem.
But heres an added bonus. What happens is the line spools off the reel. A lot easier and thats important when youre flipping and pitching.
It makes it a whole lot easier the line just comes off just like butter. So its great okay and once you have it up you dont wanna fill it up all the way you wanna leave about an eighth of an inch of line left to the edge of the spool. The reason you wanna do that is because when you depress on the button on the reel.
It actually is kind of a lever it comes open at the top. But it presses down on the bottom. And if you have too much line on the spool.
Its actually gonna touch that line and its gonna inhibit the way for your casting. Its gonna cause a problem. So dont fill it up all the way at about there.
And thats about right now that youre done you just clip off the line put it on your rod spool. It up and you tie your favorite lure and youre ready to go hope that helps for more tips and tricks like this and for the answers to all your questions about bass fishing visit bassresourcecom. .
Thank you for watching all the articles on the topic How To Spool Braid On A Baitcaster | Bass Fishing. All shares of g4site.com are very good. We hope you are satisfied with the article. For any questions, please leave a comment below. Hopefully you guys support our website even more.